ColourCyc 250 LX
can operate automatically, running a series of internally recorded programs whose settings are determined by
the dip switch settings imposed by the operator.
No signal cable should be connected to the fixtures XLR3 sockets, as described in section 8.1 “Signal con-
nection for automated “solo” operation”.
Activating automated operation
Set to
ON
the dip-switch named
built in program control
. From this moment, the dip-switches 1 to 9 may be used to adjust
the various parameters for automated colour changes: program selection, fade times and speed.
Selecting automated colour change programs.
Dip-switches from
PR1
to
PR4
(program 1 to program 4), when switched to the
ON
position,
activate preset colour change
programs.
The 4 in-built programs have the following features:
Program 1: all colours, with the exception of open white, in a smooth, slow crossfade sequence
Program 2: all colours in a smooth, slow crossfade sequence
Program 3: all colours, with the exception of open white, in sequence.
Program 4: all colours in sequence.
Selecting the hold time
Dip-switches
T1
and
T2
allow for one of 4 hold times for the various colours
Selecting the fade speed
Dip-switches
SP1
and
SP2
allow for one of 4 fade times to be selected:
All programs in continuous sequence
Dip switch
All PR
in the
ON
position allows for all programs to be replayed in sequence automatically and continuously.
S P 1
S P 2
Speed
off
off
fast
on
off
medium
off
on
medium slow
on
on
slow
T 1
T 2
t (sec.)
off
off
3
on
off
1 0
off
on
3 0
on
on
6 0
Important note:
Only one program at a time may be selected.
ON
ON - built in program control
PR 1 PR 2 PR 3 PR 4
T 1
T 2
SP 1
SP2
all PR
built in program and speed
12. Dip-switch settings for automated “solo” operation.
English
14
