Victory 3_en.pdf http://en.codelight.com.cn
38
10.
Controller Setup Management
Press the
Setup
key, you can enter the
‘Setup’
menu for different controller setup options.
10.1.
Controller Options
10.1.1.
Controller Manage
You can setup different system run modes in
[Console
Manage]
.
Playback GO+/GO-
--- The option defaults in
[Enable]
. When Cue-lists link mode is manual or
‘Link=Off’
, the key under playback fader can be used
as a GOTO function (Go+ or Go- depends on the
direction setting of Cue-lists). If the option in
[Disable]
,
if the playback fader is not fully output, the keys under
the faders can be used as intensity flash output.
Quick Palette
--- The option defaults in
[Enable]
. You
can recall presets without selecting fixtures. If the option in
[Disable]
, you have to select the fixtures before
recalling presets. If you do not select any, the presets can not be recalled.
Playback LED enable
--- The option defaults in
[Enable]
, the key upon Playback fader will be highlighted if it had
a program. If the option in
[Disable]
, the key upon playback fader will show in backlight color whatever if it has a
program in the playback.
Skip Macro Show start time
--- The option defaults in
[Disable]
. It is used for the macro show which recorded
with the internal clock. The start time slot of the macro show will be canceled if the option in
[Enable]
.
Keep the brightness
--- The option defaults in
[Disable]
. The group of fixtures will be lightened up orderly from
function of
‘Seriatim light up fixtures’
. If the option in
[Enable]
, the fixtures will always keep on.
In the
‘User Setting’
section, you can change the refresh rate output ranging from 26~37Hz to match the rate of
any special fixtures being used. You can also reset all options here by pressing
[Set to Default]
.
10.1.2.
Setup Date and Time
You can set the local time which displays on top of touch screen. When power on, the controller reads the latest
‘defaultshow’
file which according to the backup date and time.
