Victory 3_en.pdf http://en.codelight.com.cn
36
7>
Release all playbacks and presets when finished recording. Press the record key again, then
[confirm]
to
save the macro show.
8>
After saved, all used playbacks and presets as well as the operations will be listed in the
‘Time Code’
window.
9>
You can replay the macro show on the window directly.
If the macro show saved by
Internal Clock
, the macro show starts to replay once you pressing play on the
time code window.
Note: If there is a time slot without any operation at the beginning, it will run out as when recording. You may skip
the time slot by the option
[Skip Macro Show start time]
in
‘Controller Setup’
.
If the macro show saved by
MIDI MTC
, the macro show will be standing by when pressing the show record
in the
‘Macro Shows’
window. The show starts to play once you pressing play on the external device.
If the macro show saved by
Internal Music
, the macro show starts to play once you select the show record
on the
‘Macro Shows’
, and the music which used for saving the record will be played automatically.
10>
The macro show will stop automatically when it finished.
Note: When the macro show is finished we should stop playing music on the external device manually if the record
is saved by
MIDI MTC
.
9.2.1.
Edit Macro Show
You are allowed to revise the saved macro shows after created. We can call out the
‘Macro Show’
window and select
the show record to switch displaying its operations in the
‘Time Code’
window.
9.2.1.1.
Insert New Operations
You are allowed to add new operations into a saved macro show
1>
Select the macro show to be edited;
2>
Press the record key in the
‘Time Code’
window and play the music again to start record;
