Cobra CX50 2014 5R King, Руководство пользователя

Страница: 47 / 79

45
3. Hold the throttle to wide open, and kick repeatedly (approximately 20 times) or until
the gauge reading does not increase in value with each kick.
Base Gasket Selection
Tools required

17mm wrench

1mm flexible solder material

measurement calipers
When rebuilding the ‘top end’ of your Cobra motorcycle, care must be taken to ensure
the proper squish clearance. Squish clearance is defined as the minimum distance
between cylinder head and piston at TDC, and there are negative effects of either
having too much or too little clearance. Since parts like the crank, connecting rod,
cylinder head, piston, and crankcases all have varying tolerances, Cobra offers several
different base gasket
thickness’ to ensure that you can always set the squish clearance
of your engine to factory specifications.
For base gasket replacement use the code (see figure 21 for location) along with the
table on the following page reorder the correct thickness gasket.
Figure 21
Code
Supplied Base
Gasket Thickness
Cobra #
# mm inch Part #
0.25 0.010 ZCMU0011
3 0.3 0.012 ZCMU0703
4 0.4 0.015 ZCKG0501
5 0.5 0.020 ZCMU0705
6 0.6 0.024 ZCMU0706
7 0.7 0.028 ZCMU0707
8 0.8 0.031 ZCMU0708
1 1.0 0.039 ZCMU0016
NOTE:
Tolerances will affect the actual gasket thicknesses.