Cobra CX50 2014 5R King, Руководство пользователя

Страница: 13 / 79

11
Proper Chain adjustment
Tools required for chain adjustment

19 mm wrench or socket

13 mm wrench or socket
1. Make sure that the rear wheel is aligned
properly.
2. For proper adjustment, the chain should
have 35 mm (1 3/8”) free movement just
behind the chain block with no load on the
bike (figure 2)
Figure 2
CAUTION:
Sit on the bike and verify that the chain has a minimum of 12mm (1/2”) free movement
when the chain is at it’s tightest point.
3.
If the chain requires adjusting, loosen the axle
with a 19 mm wrench and tighten the chain by
rotating the adjustor bolts clockwise (CW) or loosen
the chain by rotating the adjustor bolts (CCW).
4. Retighten the axel bolt to 25 ft-lb (34 Nm).
5. Retighten the adjustor bolt
Figure 3
Rear Brake Maintenance
CAUTION:
Too little brake pedal free-play will allow the brake pads to drag causing the pads to
wear prematurely and possible engine component failures. Too much free-play will not
allow the rider to apply the brakes quickly.
1. Set pedal height/position first, then
2. Set pedal free play.
Brake pedal height can be adjusted with the bolt and nut located under the rear of the
brake pedal. The free-play is adjusted with the adjustable plunger on the end of the
brake pedal.
CAUTION:
Use only DOT 4 brake fluid