Cobra CS9, Инструкция по установке и эксплуатации

Страница: 17 / 20

15
- Australia:
- New Zealand:
- United Kingdom:
Category:
II
2H3P
(20, 30 / 37).
Flue Type: A
1.
NOTE:
(*) Measure burner operating pressure at manifold test point with both burners operating at full setting.
Operating pressure is ex-factory set and is not to be adjusted, apart from when converting between
gases, if required. (Refer to details in this section for further information.
Main Burner Injectors
Ø 1.85mm Ø 1.15mm
Low Fire
Size
Ø 1.00mm Ø 1.00mm
Adjustment
2 turns out (c.c.w.) ½ turn out (c.c.w.)
Supply Pressure 1.13 - 3.40 kPa 2.75 - 4.50 kPa
Burner Operating Pressure (*) 1.0 kPa (*) 2.55 kPa (*)
Gas Regulator Cap Screw
Main Burner Injectors Ø 1.85mm Ø 1.15mm
Low Fire
Size Ø 1.00mm Ø 1.00mm
Adjustment
2 turns out (c.c.w.) ½ turn out (c.c.w.)
Supply Pressure
1.13 - 3.40 kPa 2.75 - 4.50 kPa
Burner Operating Pressure (*) 1.0 kPa (*) 2.55 kPa (*)
Gas Regulator Cap Screw
Main Burner Injectors
Ø 1.85mm Ø 1.15mm
Low Fire
Size
Ø 1.00mm Ø 1.00mm
Adjustment 2 turns out (c.c.w.) ½ turn out (c.c.w.)
Supply Pressure
20 mbar 37 mbar
Burner Operating Pressure (*) 10 mbar 26 mbar
Gas Regulator Cap Screw