![background image](http://html1.mh-extra.com/html/cobra/2005-king/2005-king_owners-manual_2630593048.webp)
Figure 28
16. Torque to 12 Nm (105 in-lb) in the pattern shown in figure 28.
17. Trim away any excess gasket material.
NOTE:
Check engine mount holes for excess material that may cause problems
in engine installation.
18. Install the piston with new wrist pin bearing and, pin and clips.
CAUTION:
Be sure to align the piston such that the arrow on the top piston surface points to
the exhaust (front of bike/engine) and put assembly lube on the connecting rod
bearing.
19. Install the piston rings.
CAUTION:
Ring end gap should be no less than 0.25 mm (0.010”) and no more than
0.64mm (0.025”)
20. Apply gasket sealer (ThreeBond #1104, semi-drying liquid gasket material) to
the cylinder deck areas around the coolant passage and cylinder studs as
shown in figure 29.
47
Содержание 2005 King
Страница 1: ......
Страница 46: ...Figure 25 Figure 26 45...