![background image](http://html1.mh-extra.com/html/cobra/2005-king/2005-king_owners-manual_2630593012.webp)
o
Check the frame for cracks in the metal or cracks in the paint that
might indicate that the metal has been stressed beyond it’s safe limits.
Replace or get properly rewelded as necessary.
o
Inspect the rear sprocket damper plate for bending or warping.
Straighten or replace if more than 1/16” (1.6 mm) from flat.
o
Check the rims for signs of stress, like cracks around the rim, spokes
and hub.
•
Every 2 hours of operation
o
Replace the transmission oil.
•
Every 10 hours of operation
o
Replace the fork oil.
o
Have the shock oil replaced by a Certified Cobra Mechanic.
CAUTION:
1.
Because of the amount of heat generated by the clutch and engine during
extended periods of riding, it is advisable to remove the ignition cover
afterward to allow the ignition to cool off. The heat transfers through the
cases and can damage the stator as it cools off because of lack of airflow
around the stator.
2.
If you ever need to weld anything on the bike, disconnect the spark plug
cap, unplug the ignition, disconnect the kill switch, scrape the paint bare
near the area to be welded and put the ground clamp as close to the area
to be welded as possible.
Be sure the fuel tank and carburetor have been removed and safely located
away from the welding process.
3.
The frame is 4130 Chrome Moly and it is important to weld it with the proper
rod and heat settings set as light as possible. Cobra recommends replacing
the frame with a new one if the old one becomes damaged.
4.
If your kick-starter lever does not return to the rubber bumper, use WD-40
or light penetrating oil under the plastic cover behind the spring on the
shaft. The shaft is a very close fit to the case and also has an O-RING in it
and is difficult to get lubrication to which may cause binding. If it does not
loosen up, remove the kick-starter cover and kicking assembly. Grease the
shaft.
11
Содержание 2005 King
Страница 1: ......
Страница 46: ...Figure 25 Figure 26 45...