manualshive.com logo in svg

Cobalt Digital Inc HPF-9000, Руководство по эксплуатации продукта

Поделиться
Скачать
Cobalt Digital Inc HPF-9000 Скачать руководство пользователя страница 9

HPF9000-OM (V1.8)

HPF-9000 PRODUCT MANUAL

1-3

Introduction

Safety Summary

Safety Summary

Warnings

Cautions

HPF-9000 Functional Description

The HPF-9000 is an openGear

®

-compatible

1

 2RU high-density modular 

frame offering 360 Watts of net (user) available power in a high-capacity 
20-slot format. (Maximum card capacity is determined by card model(s) 
installed and other factors (see Frame Card Capacity and Rear I/O Modules 
on page 1-5).

High power-density power supplies (single standard, redundant second 
optional) and engineered cooling/ventilation design allow 10 high-power 
cards in a frame (10 x 36 W = 360 W), or 20 medium-power cards in a frame 
(20 x 18 W = 360W). Separate forced-air cooling paths are provided for the 
card area and the power supply areas. An intelligent fan controller adjusts fan 
speed with changes in power supply loading and temperature.

The HPF-9000 can accommodate two front-loaded PSU-9000 power supply 
modules. Adding a second (optional) supply gives the frame full power 
redundancy. The PSU-9000 power supply unit is interchangeable as a primary 
or redundant power supply module, with supplies in either position being 
hot-swapable. Each power supply contains an independent cooling fan and a 
front-mounted power switch.

The HPF-FC Network Controller Card (furnished as standard on the 
HPF-9000 frame) allows Ethernet connectivity to any number of connections 
for full multi-point control and monitoring via free DashBoard™ software. 

The frame is equipped with two independent reference buses that can supply a 
selected reference to cards within the frame.

! WARNING !

To reduce risk of electric shock do not remove line voltage service barrier cover on frame 
equipment containing an AC power supply. NO USER SERVICEABLE PARTS INSIDE. 
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

This device is intended for environmentally controlled use only in appropriate video 
terminal equipment operating environments.

CAUTION

Heat and power distribution requirements within a frame may dictate specific slot 
placement of cards. Cards with many heat-producing components should be arranged to 
avoid areas of excess heat build-up. As such, avoiding placing the card adjacent to other 
cards with similar dissipation values if possible.

1. openGear® is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross
Video Limited. 

Содержание HPF-9000























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды