Cobalt Digital Inc HPF-9000, Руководство по эксплуатации продукта

Страница: 43 / 54

HPF9000-OM (V1.8) HPF-9000 PRODUCT MANUAL
2-25
Installation and Setup
Network Controller Card DashBoard Status and Settings Interfaces
Frame Setup and Auxiliary Function Control Tabs
Table 2-1 individually lists and describes the Setup, Network, Enumeration,
and Alarms control tabs. Where helpful, examples showing usage of a
function are also provided.
Table 2-1 Frame Setup and Auxiliary Control Descriptions
Provides controls and fields for setting frame fan speed,
date/time, and custom override card naming
• Fan Speed Control Allows fan speed to be reduced from default fastest enabled to reduce
ambient acoustic noise levels.
• 6/6 is maximum setting (full fan speed enabled)
• 1/6 is minimum setting (1/6 max fan speed)
Note: Fan speed minimum setting is automatically overridden in cases
where more cooling is determined to be required based on frame
power consumption.
• Restore Factory Defaults Button
Restore Factory Defaults provides factory reset of all fields and
functions.
When Confirm is clicked, a Confirm? pop-up appears, requesting
confirmation.
• Click Yes to proceed with the restore.
• Click No to reject restore.
Invoking Restore Factory Defaults will result in loss of user settings
such as network settings.
• Identify Frame Button
When pressed, provides a command to connected frame to momentarily
identify itself by causing the frame’s front panel/door FAULT LED to flash
and its beeper to sound (as long as beeper jumper is not set to Mute).
Identify function times out automatically in appr. 8 seconds, or can be
cancelled by pressing the button again.
• Frame Date/Time Entry Controls Allows a running date and time to be entered for the frame and
connections displayed in DashBoard.
When date/time are entered as desired, press Apply to invoke the
settings.
Note: Entry must be entered in format shown to be invoked.
• Card Name Custom Override Entry
Allows user custom names to be entered for cards in user slots 1 thru 20.
Note: • DashBoard may need Refresh for custom names to appear.
• Custom names will only appear in other DashBoard connections
where a card is installed in the slot with the custom name.
•
•
•