cPad – MP Configuration Manual
Documentation Revisionv1.07
16
Firmware Update
From the cPad firmware V1.0, the cPad can be upgraded either by using a USB
stick or by a network download from the My Prints server.
Firmware upgrade with a USB stick:
Copy to the root of a USB stick the file xxxx.cpad (where xxxx is the name of the
application and version).
Plug the USB stick while the Configuration or the My Prints application is
running, after 10 seconds you’ll get a windows popup asking for an upgrade
confirmation.
Remove the USB stick after about 1 minute while you back see the Cartadis
logo shown during the boot process of the cPad.
Firmware upgrade from the My Prints server:
Copy the file xxxx.cpad to the My Prints server folder located at
[app-‐path]\server\custom\web\device\cartadis-‐cpad (if these folders do not
exist then manually create them)
Rename the file xxxx.cpad to “firmware.cpad”.
If the original firmware is less thanV1.3 Switch OFF and ON the cPad otherwise
the upgrade will be done automatically.
Obtaining the latest firmware:
Please visit the below site for the latest My Prints firmware.
www.copymonitoring.com/myprints
This page is password protected! The password is: hellocpad
