cPad – MP Configuration Manual
Documentation Revisionv1.07
12
4.
ext-device.cartadis_cpad.reader-invert-lsb-msb:
•
If set to “
on”
the string, which is supposed to be a Hex value, is
inverted. The first byte of the string becomes the last one and so
on
…
The size of the source string must be even since a hex byte is
represented by 2 ASCII chars, nibble in a byte are not reversed.
5.
ext-device.cartadis_cpad.reader-start-index:
•
Its default value is 0, it defines the starting position in the Card ID.
For example if the card reader returns the value “9876543210” and if
this parameter is set to 3 the cPad will send to the server the string
“6543210”.
6.
ext-device.cartadis_cpad.reader-data-length :
•
It defines the maximum length to the returned string. For example if
the card reader returns the value “9876543210” and if this
parameter is set to 6 the return string will be “987654”.
•
The special value 0 means no length truncating will be applied.
7.
ext-device.cartadis_cpad.reader-hex-to-dec :
•
If set to “
on”
the string, which is supposed to be a Hex value is
converted in decimal.
8.
ext-device.cartadis_cpad.reader-padding-length :
•
It defines the minimum length of the returned string. If the string if
smaller than this value characters “0” will be adding in front. The
value 0 means nothing is added in front.
Other Parameters
Logout when print list becomes empty
Parameter -‐ (ext-‐device.cartadis_cpad.skip-‐main-‐menu-‐on-‐finish)
After having released print jobs if the print list is empty the cPad switches
automatically to copy mode if the parameter is set to ‘N’. It will automatically
logout if set to ‘Y’.
Copy session automatic logout
Parameter -‐ (ext-‐device.inactivity-‐timeout-‐secs)
During a copy session an automatic logout is perform when no copies are done
during at least “
ext-‐device.inactivity-‐timeout-‐secs
”.
