Copy Monitoring Australia Pty Ltd
Revision Date July 2012
9
Offline Test Mode
By selecting the Copier Tab you get access to the offline test mode options. In
this mode you can press Start to enable the MFD and Stop to disable the MFD.
When you press Start you can then complete photocopies and the number
completed will be displayed in the count column.
This mode is useful when a network connection is not available and you need
to complete and test the physical connection to the MFD.
Touch Panel Calibration
To calibrate the Touch Panel, press on TP Calibration then use the end of a pen
or similar instrument as illustrated below to touch each point as they are
displayed on the Touch Panel. The calibration screen will automatically close
when all five points have been calibrated.
