Copy Monitoring Australia Pty Ltd
Revision Date July 2012
7
Advanced Configuration
The configuration menu allows the setting of the network parameters:
You can either choose a DHCP or a static IP address.
You must define the My Prints Server IP address with either a
static IP or with a DNS name (if your My Prints server is
registered in a DNS).
Network Settings
If you modify a parameter you have to save the modification by pressing the
button “Save” then pressing “Quit” to close the Configuration menu and to
start the My Prints application.
Application Server
Select DHCP or a Static IP
Address.
Tip: Please note that if no
DHCP server is available,
as a minimum
requirement you will need
to define an IP Address
and Mask for the cPad on
the Network Tab and the
My Prints Server IP
address and cPad name
on the Application Tab.
Define the My Prints
Application Server IP
Address.
The cPad Name will be the
name that is defined in
My Prints Devices table
MFP Interface and Ssh
settings are explained
later
