cPad – MP Configuration Manual
Documentation Revisionv1.07
14
cPad Screen saver
The parameter
ext-‐device.cartadis_cpad.screen-‐saver-‐level2
defines the
number of seconds of inactivity before the screen is switched off. A user must
then touch the screen to have it lighten up.
cPad IP address
Parameter – (ext-‐device.cartadis_cpad.device.ip-‐address)
When the cPad is setup to get its IP address from a DHCP server you can get
this IP by reading the parameter
ext-‐device.cartadis_cpad.device.ip-‐address
cPad parameters update
Parameter – (ext-‐device.cartadis_cpad.status-‐period )
The cPad polls the server every
ext-‐device.cartadis_cpad.status-‐period
seconds (default is 180 s). In case of large installations, when the network
traffic may be a concern, you can increase this parameter to reduce the global
traffic and the server workload.
Card ID String
ext-‐device.card-‐no-‐regex (GLOBAL).
This is a My Prints parameter allowing the filtering and mapping of the card ID
string to another string. See details in Appendix A
Unicode Character Support
ext-‐device.cartafis_cpad.use-‐unifont
You must manually add this in the Advanced Config page on the My Prints
Server, and set the value to << Y >>
This will allow the My Prints cPad to display print jobs with Asian Characters.
Keyboard Latency
ext-‐device.cartadis_cpad.keyboard-‐latency
This parameter is an integer value in milliseconds, if the same key is pressed
twice within ext-‐device.cartadis_cpad.keyboard-‐latency milliseconds then the
second press will be ignored.
