Club Car Carryall 295 SE, Руководство по техническому обслуживанию и ремонту

Страница: 77 / 456

HYDRAULIC AND PARK BRAKE SYSTEMS Brake Disc and Hub – 2008-2011 Models
6
1895
Figure 6-6 Axle Spindle Nut and Washer
1896
Figure 6-7 Brake Caliper and Upright
3. Remove and discard the two hex-head bolts that secure the caliper assembly to the upright (Figure 6-7, Page
6-11) . See following CAUTION.
CAUTION
• Wrap a plastic wire tie around the caliper body to a place on the frame so that it does not hang
suspended by the hydraulic brake hose.
4. Remove the outer tie rod end from the upright.
5. Remove the lower ball joint from the upright (Figure 6-8, Page 6-11) .
1897
Figure 6-8 Lower Ball Joint and Upright
1898
Figure 6-9 Upper Ball Joint and Upright
6. Remove the upper ball joint from the upright (Figure 6-9, Page 6-11) . See following NOTE and CAUTION.
NOTE: It may be necessary to use a ball joint removal tool to separate the ball joint stud from the upright.
2008-2012 All-Wheel Drive Maintenance and Service Manual Page 6-11