Cloos QINEO, Руководство по эксплуатации, Страница: 27 / 186

27
Operational safety
• The mounting area should be free of dust and aggressive
agents.
• The ground should be horizontal and flat (admissible incli-
nation angle max. 10º).
• The distance between power source and environment
should at least be 0.50 m to allow the cooling air to circu-
late unhindered.
• The cooling air inlets and outlets must not be blocked by
things such as welder’s apron, tissues, drawings, walls etc.
The admissible ambient temperature may vary from -10°C to
+40°C.
Relative air humidity:
up to
50% at 40° C (thawing excluded)
up to 90% at 20° C (thawing excluded)
The protection class IP 23 does not allow to install the machine
in the rain. If required, the machine must be covered on a
large surface. In the process, ensure that the through-flow of
cooling air is not impaired.
The machine should be stored in a dry and clean room. The
ambient temperatures must not exceed -20
0
C and +45
0
C.
In case of a longer storage, the machine should be covered
with a suitable foil.
In principle, the power source may only be transported
without shielded gas bottle.
The power source can be moved on its wheels. When using a
fork lift truck, the forks must be placed between the wheels.
The power source must lie diagonally to the moving direction
and be completely on the fork.
If a crane is available, two crane belts have to be pulled
crosswise under the power source inside the wheels.
You have to use a crossbeam, if you want to lift the power
source by means of the eyebolts (crane eyelets). The arising
mechanical tractions must vertically affect the bolt axis, see
label.
For the transport of the machine it is important to adhere
to the valid national and regional guidelines and safety
regulations in force.
4. Environmental circumstances
4.1 Storage
4.2 Transport