Cloos QINEO, Руководство по эксплуатации, Страница: 107 / 186

107
Functions on the left side:
Function name/symbol Functional description
Left arrow key Cursor moves one position to the left
Capital letters and special characters Switch between upper and lower case
letters
Small letters and special characters
Numbers and special characters
Functions on the right side:
Function name/symbol Functional description
Right arrow key Cursor moves one position to the right
"Insert" function
Inserts one or more characters into an existing
text.
The new character is always added left to the
present cursor position.
Function "<--"
To delete characters.
The character left to the cursor is always deleted.
"Enter" function To confirm the entry.
Turn rotary knob 3 (yellow cursor) until you find the required character in
the character table. Shortly press rotary knob 3 to transfer the character to
the upper line.
Once you have selected all characters, confirm your selection with the
"Enter" function. The job is now saved with all selected welding parameters
under the name you selected, see Figure 67.
The new job is not activated by the storage process. Activation is done with
the "Job" button.
15.2 Overwrite an existing job
To overwrite an existing job, a job must be activated, see section "15.4
Activate job".
If a job is activated, you can optimise the existing welding parameters and
overwrite them by pressing the save button twice.
15.3 Copy a job
To copy an existing job, a job must be activated, see section "15.4 Activate
job".
Press the "Save" button in job mode. Select a new storage space by means
of rotary knob 3. Press the "Save" button again to copy the current job to
the new position.
To exit the menu, press the "Esc" key or the "MAIN" key.