Cloos QINEO, Руководство по эксплуатации, Страница: 25 / 186

25
Operational safety
The power source must only be operated when the safety
devices are fully operative.
If the safety devices are not fully operative, this is dangerous
for:
• the life and limb of the operator or third persons
• the power source or other property of the owner and op-
erator.
Never evade safety devices or put them out of action.
• Please check the power source weekly for damages to be
seen and check the operativeness of the safety devices.
• Only use the original coolant of the manufacturer if liquid
cooled power sources are concerned.
• Only the original coolant is suitable for the CLOOS power
sources because of its properties such as electric conduc-
tivity, antifreeze compound, material compatibility, protec-
tion against corrosion and inflammability.
• Do not mix the original coolant with other coolants to
prevent a chemical reaction which could clog the cooling
circuit and damage the coolant pump. The manufacturer
is not liable for such damages.
Pay attention to the following notes when opening the
cooling circuit:
• Bring the welding torch and the torch bracket into a suit-
able position to avoid an uncontrolled leakage of the cool-
ant, particularly over electric or electronic components.
• Provide a suitable collection tray to collect the coolant.
Used coolant must be disposed of correctly as hazardous
waste in accordance with the official local regulations.
The coolant must
not enter the normal waste water system!
• Use only original spare and wear parts. Foreign bought
spare and wear parts do not guarantee that they have
been designed and manufactured strain-proof and in
compliance with safety.
• Parts which are not in perfect condition must be ex-
changed immediately.
3.6 Safety precautions in daily operation
CAUTION!
Xn Xn