Cloos QINEO, Руководство по эксплуатации, Страница: 156 / 186

156
No.
Error message on the
display
Possible cause Remedy
275 QWD2- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance

Service
276 QWD3- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance
 Service
277 QWD4- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance
 Service
278 CDD1- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance

Service
279 CDD2- Overcurrent
Overload results in increased
current load of the drive unit.

Check wire feed distance
 Service
280 CDD3- Overcurrent
Overload results in increased
current load of the drive unit.
 Check wire feed distance

Service
281 CDD4- Overcurrent
Overload results in increased
current load of the drive unit.

Check wire feed distance
 Service
282
Tandem- Version Slave
out-of-date
Software version not compatible.
 Synchronise software

Service
283 Tandem- Slave failed
No connection could be established
to the Slave for 2 seconds.
 Check Tandem connection cable
 Check Slave
 Service
284
Tandem- System not
ready Slave does not send any signals to
the control.
 Switch on Slave
 Check Slave
 Service
285
Pulse synchronisation-
Pulse receiver has no
input pulse
Pulse generator does not send any
input pulse to pulse receiver.
 Check pulse generator settings
 Check connection

Service
314
Option chip- No chip
found
Option chip not found.
(From version X.08 on Option chip
inquiry)
 Switch machine Off and On
 Check option chip connection

Service
315
Option chip- Data error
in chip Error when importing data in
option chip.

Enter new option chip code

Use new option chip
 Service
316 Option chip- Wrong chip Option chip is not recognised.
 Use new option chip

Service
317
Option chip- Wrong
activation code
Wrong activation code entered.

Check activation code entry

Enter activation code again
 Service
334 Unknown password Password entered not stored.
 Check password entry
 Enter password again
 Service
335 Unknown user
Selected user is not stored in the
welding power source.
 Select user again
 Create new user
 Service