1
Contents
Page
Contents
1
Features
2
Parts supplied
3
Connections
4
Installation
5-8
Controls 9
DSP Connections
10
Mute Control
11
Master to DSP Connections
12
Slave Connections
13
IR Remote Control
14
Remote Control Information
15
Programming Master Cable Height
16
Programming Slave Cable Height
17
Microphone Angle Adjustment
18
Horizontal / Vertical Mounting
19
Slave Communication Link
20
Cautions / Troubleshooting
21
Specification
22
Warranty
23
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions carefully as they contain important information
concerning safety and safe operation of this equipment..
Heed all warnings in this manual they are there for the safety of you and others.
Keep these instructions in a safe place in case they need to be referred to later.
Do not install near sources of heat or water. Clean with dry cloth only.
Use only with the bracket supplied.
Do not burn or incinerate the remote control battery. Danger of explosion.
WARNING: Do not connect a supply Voltage until the CCRM 4000 is fixed securely in
place, IR sensor connected (if fitted / Master only), Ceiling bezel is mounted in the
ceiling tile, microphone and magnet has been passed through the Ceiling Bezel and
all other connections have been made.
Do not power the system off when the cable is fully extended. Always retract the cable back
to the ceiling bezel after use.
Do not angle the microphone more than 40 degrees or it will become jammed In the
bezel
