CLIVET WSAN-YMi 101, Инструкция по установке, использованию и обслуживанию

Страница: 58 / 128

Code State Default Min max
setting
interval
unit
2.10 T4C1
The ambient temperature 1 of climate related curves for
cooling mode.
35 -5 46 1 °C
2.11 T4C2
The ambient temperature 1 of climate related curves for
cooling mode.
25 -5 46 1 °C
2.12 ZONE1 C-EMISSION
The type of zone1 end for cooling mode
：
0=FCU(fan coil
unit)
，
1=RAD.(radiator)
，
2=FLH(floor heating)
0 0 2 1 /
2.13 ZONE2 C-EMISSION
The type of zone2 end for cooling mode
：
0=FCU(fan coil
unit)
，
1=RAD.(radiator)
，
2=FLH(floor heating)
0 0 2 1 /
3.1 HEAT MODE Enable or disable the heating mode 1 0 1 1 /
3.2 t_T4_FRESH_H
The refresh time of climate related curves for heating
mode
0.5 0.5 6 0.5 hours
3.3 T4HMAX
The maximum ambient operating temperature for heating
mode
25 20 35 1
°C
3.4 T4HMIN
The minimum ambient operating temperature for heating
mode
-15 -25 30 1 °C
3.5 dT1SH The temperature difference for starting the unit (T1) 5 2 20 1
°C
3.6 dTSH The temperature difference for starting the unit (Ta) 2 1 10 1
°C
3.7 t_INTERVAL_H The compressor start time interval 5 5 60 1
MIN
3.8 T1SETH1
The setting temperature 1 of climate related curves for
heating mode
35 25 65 1 °C
3.9 T1SETH2
The setting temperature 2 of climate related curves for
heating mode
28 25 65 1 °C
3.10 T4H1
The ambient temperature 1 of climate related curves for
heating mode
-5 -25 35 1
°C
3.11 T4H2
The ambient temperature 2 of climate related curves for
heating mode
7 -25 35 1
°C
3.12 ZONE1 H-EMISSION
The type of zone1 end for heating mode
：
0=FCU(fan coil
unit)
，
1=RAD.(radiator)
，
2=FLH(floor heating)
1 0 2 1 /
3.13 ZONE2 H-EMISSION
The type of zone2 end for heating mode
：
0=FCU(fan coil
unit)
，
1=RAD.(radiator)
，
2=FLH(floor heating)
2 0 2 1 /
3.14 t_DELAY_PUMP
the time that the compressor has run before starting the
pump.
2 0.5 20 0.5 MIN
4.1 T4AUTOCMIN
The minimum operating ambient temperature for cooling in
auto mode
25 20 29 1 °C
4.2 T4AUTOHMAX
The maximum operating ambient temperature for heating
in auto mode
17 10 17 1 °C
5.1 WATER FLOW TEMP. Enable or disable the WATER FLOW TEMP.:0=NON,1=YES 1 0 1 1 /
5.2 ROOM TEMP. Enable or disable the ROOM TEMP.:0=NON,1=YES 0 0 1 1 /
5.3 DOUBLE ZONE
Enable or disable the ROOM THERMOSTAT DOUBLE
ZONE:0=NON,1=YES
0 0 1 1 /
6.1 ROOM THERMOSTAT The style of room thermostat
：
0=NON,1=MODE
SET,2=ONE ZONE,3=DOUBLE ZONE
0 0 3 1 /