Climax VM1350, Руководство по эксплуатации

Страница: 15 / 98

P/N 89800, Rev. 2 Page 3
Moving parts –
CLIMAX machines have numerous exposed moving parts
and interfaces that can cause severe impact, pinching, cutting, and other
injuries. Except for stationary operating controls, avoid contact with mov-
ing parts by hands or tools during machine operation. Remove gloves and
secure hair, clothing, jewelry, and pocket items to prevent them from
becoming entangled in moving parts.
Sharp edges –
Cutting tools and workpieces have sharp edges that can eas-
ily cut skin. Wear protective gloves and exercise caution when handling a
cutting tool or workpiece.
Hot surfaces –
During operation, motors, pumps, HPUs, and cutting tools
can generate enough heat to cause severe burns. Pay attention to hot sur-
face labels, and avoid contact with bare skin until the machine has cooled.
1.4 M
ACHINE
-
SPECIFIC SAFETY PRECAUTIONS
Eye hazard –
This machine produces metal chips during operation. Always
wear eye protection when operating the machine.
Sound level –
This machine produces potentially harmful sound levels.
Hearing protection is required when operating this machine or working
around it. During testing, the machine produced the sound levels
1
listed in
Table 1-1.
Hazardous environments –
Do not operate the machine in environments
where potentially explosive materials, toxic chemicals, or radiation may be
present.
Machine mounting –
Do not operate the machine unless mounted to a
workpiece in accordance with this manual. If mounting the machine in an
overhead or vertical position, do not remove hoist rigging until the machine
is mounted to the workpiece in accordance with this manual.
1. Machine sound testing was conducted in accordance with European Harmonized
Standards EN ISO 3744:2010 and EN 11201:2010.
T
ABLE
1-1. S
OUND LEVELS
SMotor
Sound power >85 dBA
Operator sound pressure >85 dBA
Bystander sound pressure >85 dBA