Climax VM1350, Руководство по эксплуатации, Страница: 19 / 98

P/N 89800, Rev. 2 Page 7
2 OVERVIEW
IN THIS CHAPTER:
2.1 F
EATURES AND COMPONENTS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
2.2 S
PECIFICATIONS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
2.1 F
EATURES AND COMPONENTS
The Gate Valve Grinding and Lapping Machine, Models VM1350-1500-1600 (in
the following called Gate Valve Grinder or machine) are specifically designed for
grinding and lapping of gate valve seats. The VM 1350 for Gate Valves size DN 40
– DN 350, the VM 1500 for size DN 80 DN 500 and the VM 1600 for size DN 80
DN 600. The models with an additional “…S” written behind the model number
are designed for grinding only. They don’t include the lapping equipment.
Options are also described. The basic machine includes an electric or a pneumatic
drive system. Optionally, the machine can be delivered with electric and pneumatic
drive system. However, both drive systems are described in this operating manual.
Also the grinding tools are described from DN 40 – DN 600, but the different mod-
els don’t include all sizes of tools.
The lapping is also described, however the “…S” models (grinding only) don’t
include the lapping equipment.
DANGER
The Gate Valve Grinder should only used as prescribed. If the
Gate Valve Grinder is not used accordingly, safe operation is not
guaranteed.
Any danger to people and all damage to the Gate Valve Grinder
resulting from misuse will be the customer’s responsibility.
Any modifications of the Gate Valve Grinder made by the
customer will be at their own responsibility. This applies
especially to any changes that do not comply with the safety
requirements of the Gate Valve Grinder.