Climax VM1350, Руководство по эксплуатации

Страница: 23 / 98

P/N 89800, Rev. 2 Page 11
3 SETUP
IN THIS CHAPTER:
3.1 R
ECEIPT AND INSPECTION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
3.2 S
ELECTING AND PREPARING TOOLS
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
3.2.1 S
ELECTING TOOLS FOR PLANET WHEELS
DN 80–DN 600 - - - - - - - - - - - - - - - - - - - - 14
3.2.2 P
REPARING TOOLS FOR
DN 80–DN 600 - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
3.2.3 S
ELECTING SOLID GRINDING DISCS FOR
DN 40–DN 65 - - - - - - - - - - - - - - - - - - - - - 17
3.3 M
OUNTING THE TILTING ADAPTER ON THE VALVE BODY
- - - - - - - - - - - - - - - - - - - - - - - - 18
3.3.1 M
OUNTING THE TILTING ADAPTER ON VALVES WITH FLANGE
- - - - - - - - - - - - - - - - - - - 19
3.3.2 C
OLLAR BAND MOUNTING
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
3.3.3 M
OUNTING THE BRACKET
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
3.3.4 M
OUNTING THE DRIVE SHAFT WITH BALL JOINT
- - - - - - - - - - - - - - - - - - - - - - - - - 24
3.3.5 A
DAPTATING THE PLANET WHEEL DIA
. 100
OR DIA
. 135 - - - - - - - - - - - - - - - - - - - - - 26
3.3.6 A
DAPTATING THE PLANET WHEEL DIA
. 220
MM OR BIGGER
- - - - - - - - - - - - - - - - - - - 26
3.3.7 A
DAPTATING THE SOLID GRINDING DISCS
- - - - - - - - - - - - - - - - - - - - - - - - - - - 27
3.4 L
OCATING AND ALIGNMENT OF MACHINE IN TILTING ADAPTER
- - - - - - - - - - - - - - - - - - - - - - 27
3.5 I
NSTALLATION
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 30
This section describes the setup and assembly procedures for the VM1350-1500-
1600 Gate Valve Grinding and Lapping Machine.
3.1 R
ECEIPT AND INSPECTION
Your CLIMAX product was inspected and tested prior to shipment, and packaged
for normal shipment conditions. CLIMAX does not guarantee the condition of
your machine upon delivery.
When you receive your CLIMAX product, perform the following receipt checks:
1. Inspect the shipping containers for damage.
2. Check the contents of the shipping containers against the included invoice
to make sure that all components have been shipped.
3. Inspect all components for damage.
Contact CLIMAX immediately to report damaged or missing components.
NOTICE
Keep the shipping container and all packing materials for future
storage and shipping of the machine.
The machine ships from CLIMAX with a heavy coating of LPS 3. The recom-
mended cleaner is LPS PreSolve Orange Degreaser. All parts must be cleaned
before use.