4
2. Learn-in the Devices
There are two methods to learn in devices:
local learning
and
command learning
. Total
10 sensors are allowed to be learnt into the
system. The combined numbers of DECT
devices (WTRVS, CP-23 and CTC-808RV)
learned into CTC-1041RV can be up to 4.
Local Learning
:
You can use the local learning method to
learn in 2 RF devices or 4 DECT devices.
Refer to
2.1. Learning Pendant #1
to learn in
the first RF device,
2.2. Learning Pendant #2
to learn in the second RF device and
2.3.
Learning in DECT Devices
to learn in up to 4
DECT devices.
1. The user can turn CTC-1041RV into
learning mode to learn in WTR- Series, Fall
Sensor, WTRVS, CP-23 and CTC-808RV.
2. If you have learned the first device to the
system by following instructions in the
2.1
section, you are not allowed to use
Command 91
(Command Learning) to
learn in another device.
3. If you have learned the second device to
the sytem as instructed in the
2.2
section,
you are not allowed to use
Command 92
(Command Learning) to learn in another
device.
Command Learning
:
1.
The user can use Commands 91-94 to
learn devices into the system. These
devices include PIR Sensor, Smoke
Detector,
Panic
Button,
Carbon
Monoxide Detector, Wrist & Neck
Transmitter, Water Sensor, Pendant
Transmitter, WTR- series, Fall Sensor,
WTRVS,
CP-23
and
CTC-808RV.
Please refer to
3.2 Programming Your
1041RV: Commands 91-94
for details.
2.
Command 91
is designed to learn in
WTR- Series, Fall Sensor, WTRVS, CP-
23 or CTC-808RV only.
3.
Command 92
is designed to learn in
WTR- Series, Fall Sensor, WTRVS, CP-
23 or CTC-808RV only.
4.
Command 93
is designed to learn in
WTR- Series or Fall Sensor for silent
reporting.
Command 93
can also learn
in
WTRVS, CP-23 or CTC-808RV, but
WTRVS, CP-23 or CTC-808RV learned
in via
Command 93
does not provide
silent reporting (they provide two-way
communication).
5.
Command 94
is designed to learn in
the following sensors:
PIR Sensor ----- PIR
Smoke Detector ---- SD
Carbon Monoxide Detector----
CO
Fixed Panic Button ---- PB
Wrist Transmitter ---- WTR
Pendant Transmitter ---- WTR
Water Sensor ---- WS
Fall Sensor ---- FS
Talking Pendant ---- WTRVS
Call Point ---- CP-23
Voice Satellite ---- CTC-808RV
2.1. Learning Pendant #1
Please see the following instructions to learn in
WTR- Series and Fall Sensor.
For Normal Wrist Transmitters (WTR-) or
Fall Sensor
1. Press and hold the
RESET
button of
CTC1041RV for 6 seconds until you hear
the double beep and followed by a long
beep.
2.
The RED LED starts flashing. CTC-
1041RV is now in the learning mode.
3.
Press and both the
RESET
and
Pendant
#1 (WTR- Series or Fall Sensor)
buttons
simultaneously until CTC-1041RV emit a
double-beep.
4.
Pendant
#1
has
been
learnt-in
successfully.
5.
Press the Reset & Help button at the
same time to exit the learning mode. The
RED LED will dim to indicate that the
system is back to idle mode.
2.2. Learning Pendant #2
Please see the following instructions to learn in
the second device (WTR- Series and Fall
Sensor).
Содержание CTC-1041RV
Страница 1: ...c August 12 2013 ...
