Climax CTC-1041RV, Руководство пользователя

Страница: 26 / 37

23
4.1.9. No Pendant Present
This function is only available for the
digital Contact ID reporting method.
If there is no pendent being learnt into
CTC-1041RV 30 minutes after powering
up, it will send a
No Pendant Learnt-in
report to the Monitoring Center and repeat
every hour thereafter, until a pendant is
successfully learnt in.
< < N N O O T T E E > >
The control panel will still send No
pendant Learnt-in report even when
1041RV is only Learning WTRVS. But
if WTR is learnt in, the control panel
won’t send No pendant Learnt-in
report.
4.2. Alarm Activation
When an alarm is triggered, both RED
LED and RED HELP BUTTON backlight
turn on steadily.
An alarm report can only be canceled
by pressing the green reset button on
CTC-1041RV. An alarm report cannot
be canceled by pressing buttons on
sensors such as CP-23, WTRVS3,
808RV, WTR, Fall Sensor or Panic
Button.
After two-way communication is
established, the alarm report can be
canceled via CP-23, WTRVS3 or
808RV only if it has been triggered
by one of these DECT devices.
Confirmation Beeps
Once an alarm is triggered, CTC-1041RV
will summon help based on the
programmed reporting method. A
continuous confirmation beeping sound
(about 1s-on / 1s-off) will be heard after
CTC-1041RV dials out, indicating that the
call is in progress (regardlss of Digital or
Speech Reporting Method).
If WTRVS or CTC-808RV triggers an
alarm, WTRVS or CTC-808RV will emit
continuous confirmation beeps (about 1
second on and 1 second off).
Confirmation beeps will be heard in the
following situations:
<
<
I
I
M
M
P
P
O
O
R
R
T
T
A
A
N
N
T
T
N
N
O
O
T
T
E
E
>
>
When an alarm is triggered by any device
(except for Talking Pendant WTRVS and
CTC-808RV), two-way communication will
be set up between the Central Monitoring
Station and the Control Panel. If an alarm
is triggered by WTRVS or CTC-808RV,
two-way communication will be set up
between the Central Monitoring Station
and WTRVS or CTC-808RV.
Alarm Triggered by Talking Pendant
(WTRVS)
Press the Active button on a talking pendant to
trigger an alarm. Then you will hear a talking
pendant’s confirming beeps and the beeps will
stop until a talking pendant receives a DTMF
command. If a talking pendant receives a
DTMF command, it indicates that the
connection is setup successfully. While a
talking pendant is triggered, 1041RV’s Help
Button and Red button will lighten until
connection ends.
< < N N O O T T E E > >
When an alarm is triggered by Talking
Pendant
(WTRVS), two-way
communication will be set up between
the Central Monitoring Station, the
Talking Pendant and all CTC-808RVs
in the system. A trigger by WTRVS will
open two-way communication for all
CTC-808RVs learned in to the system.
When an alarm reporting successfully
goes through to CMS, but if no DTMF
command is received by a talking
pendant, after 2.5 minutes, connection
will timeout and the talking pendant
will stop beeping.
When reporting to CMS fails, the
talking pendant will go to retry cycle
and its confirming beeps will continue
until it receives a DTMF command or
until a retry cycle.
Alarm Triggered by Voice Satellite CTC-
808RV
When you press the Emergency button on a
CTC-808RV, an emergency report will be sent
and two-way communication will be opened for
ALL CTC-808RVs learned into the system for
5 minutes. CTC-808RV’s green LED will light
up during the communication.
<
<
N
N
O
O
T
T
E
E
>
>