Climax BB8100, Руководство по эксплуатации Оригинальные инструкции

Страница: 63 / 112

P/N 57064, Rev. 5 Page 53
impurities from the system. From then on, replace the filter every 150-200 hours. Use a high-
quality 10-micron industrial-grade filter. If the filtering system has a change-warning gage, replace
the filter whenever the gage indicates. Clean hydraulic fluid will help keep the power unit and
motor running properly.
The hydraulic fluid should be changed:
•
When the oil becomes contaminated
•
When the power unit is operated at high temperatures for a long time
•
Every two years
Hydraulic fluid level should not drop below the red bar on the fluid level/temperature gage. Add
only filtered fluid to the system. Should hydraulic fluid leak out, do not put it back in the reservoir.
Use Mobil DTE-24 anti-wear hydraulic oil or equivalent. Recommended oil operating temperature
is 150
o
F (66
o
C).
WARNING
Connect the hydraulic motor to the power unit pump before turning on
the power unit. Failure to do so will damage the pump and void all
warranties.