Climax BB8100, Руководство по эксплуатации Оригинальные инструкции

Страница: 55 / 112

P/N 57064, Rev. 5 Page 45
OPERATION
Pre-start checks
WARNING
Rotating machinery can cause serious injury. Turn off and lock
out power before making pre-start checks.
Before operating the portable boring bar
1. Tie down the rotational drive unit torque arms and the axial feed unit stop rod.
2. Check that all cutters are sharp and in good condition.
3. Secure fixed machine parts, including the tool carrier, tool head and cutting
tool. Check that moving parts move freely.
4. Check that the hydraulic power unit is OFF.
5. Check that the power unit wiring matches the electric power source. Plug the
power unit into a grounded outlet.
6. Check the power unit reservoir level. Fill the reservoir to above the red bar
with Mobil DTE-24 anti-wear hydraulic oil. Check that the power unit is level.
7. Clean the hydraulic hoses and fittings before connecting them.
8. Check that the electric pump motor on the hydraulic power unit is turning the
same way as the arrow on the case.
9. If the machine is setup in a vertical orientation, the clamp collars must be
installed for safety.