Climax BB8100, Руководство по эксплуатации Оригинальные инструкции

Страница: 62 / 112

Page 52 BB8100 Operating Manual
6. Replace the fill plug.
Bearing support assembly
Under normal conditions, bearing assemblies are lubricated for life.
Before storage, lightly oil the assemblies to prevent rusting.
Tool head assembly
Manual boring head assembly
Lightly oil all parts to prevent rusting.
Manual facing head assembly
Before use and frequently during operation, lubricate the tool head carrier with way oil through the
grease fitting. Brush chips from the leadscrew frequently to prevent thread damage. Lightly oil the
leadscrew periodically to ensure smooth travel of the tool holder. When changing tool holders,
apply way oil to the dovetail ways.
Tool carrier
Lightly oil all parts with JET LUBE 550 to prevent rusting.
Hydraulic power unit and motor
General hydraulic system
After 72 hours of operation, do the following:
1. Replace the filter cartridge
2. Check the heat exchanger for leaks. Repair any leaks before running the
power unit.
3. Clean the filler/breather.
Hydraulic motor
The hydraulic motor is maintenance-free. Fluid passing through the motor lubricates internal
moving parts. To ensure long life and dependable operation, use high-quality clean hydraulic fluid
as described in “
Hydraulic filter and fluid
”
on page 52.
Hydraulic filter and fluid
Though the hydraulic power unit requires little maintenance, changing the filter and fluid is
required for proper operation. Initially, change the filter after 72 hours of operation to remove