Climax BB8100, Руководство по эксплуатации Оригинальные инструкции

Страница: 12 / 112

Page 2 BB8100 Operating Manual
General Safety
The primary challenge for most on-site maintenance is that repairs are often done under
difficult conditions.
CLIMAX leads the way in promoting the safe use of portable machine tools. Safety is a
joint effort. As the operator of this machine, you are expected to do your part by closely
examining the job site and following the operating procedures outlined in this manual, your
own company rules, and local regulations.
WARNING
For maximum safety and performance, read and understand this entire
manual and all other related safety instructions before using this
equipment. Failure to follow the instructions and guidelines in this manual
could cause personal injury, fatalities and property damage.
QUALIFIED PERSONNEL
Before operating this machine, you must receive
training specific to this machine from a qualified
trainer. Do not operate the machine If you are
not familiar with the proper and safe operation.
OBEY WARNING LABELS
Obey all warning labels. Failure to follow
instructions or heed warnings could result in
injury, or even be fatal. Proper care is your
responsibility. Contact CLIMAX immediately for
replacement manuals or safety decals.
INTENDED USE
Use this machine according to the instructions in
this operating manual. Do not use this machine
for any purpose other than its intended use as
described in this manual.
STAY CLEAR OF MOVING PARTS
Keep clear of the machine during operation.
Never lean toward or reach into the machine to
remove chips or to adjust the machine while it is
running.
ROTATING MACHINERY
Rotating machinery can seriously injure an
operator. Lock out all power sources before you
interact with the machine.
KEEP YOUR WORK AREA CLEAN AND
TIDY
Keep all cords and hoses away from moving
parts during operation. Do not clutter the area
around the machine.
SECURE LOOSE CLOTHING AND LONG
HAIR
Rotating machinery can cause serious injuries.
Do not wear loose fitting clothing or jewelry. Tie
back long hair or wear a hat.
HAZARDOUS ENVIRONMENTS
Do not use the machine near explosive
chemicals, toxic fumes, inappropriate radiation
hazards or other hazardous environments.
FLYING CHIPS
Flying metal chips can cut or burn. Do not
remove chips until after the machine has been
locked out, all power sources are off and the
machine has stopped.