Note: Some features have more than two possible settings. Pressing
will select the one chirp
setting, pressing
will toggle through the two-chirp and higher settings.)
6. R
Reelleeaassee.. The Valet/Program switch can now be released.
Once a feature is programmed:
➤
➤
Other features can be programmed within the same menu.
➤
➤
Another menu can be selected.
➤
➤
The learn routine can be exited if programming is complete.
To access another feature in the same menu:
1. Press and release the Valet/Program switch the number of times necessary to advance from the
feature you just programmed to the next one you want to program.
2. Then press the Valet/Program switch once more and HOLD it.
For example, if you just programmed the third feature in the menu and you would like to program
the seventh feature in the menu, you would press and release the Valet/Program switch four times
and then press it once more and HOLD it. The siren would chirp seven times to confirm access to
the seventh feature.
To select another menu:
1. Press and HOLD the Valet/Program switch.
2. After three seconds, the unit will advance to the next menu and the siren will chirp, indicating
which menu has been accessed.
For example, if you just programmed some features in the first menu and you want to program a
feature in the third menu, press and HOLD the Valet/Program switch. After three seconds, the siren
chirps twice indicating access to the second menu. Continue to HOLD the switch and three
seconds later the siren will chirp three times indicating access to the third menu. Features in the
third menu are then programmable following steps 4 through 6 of the System Features Learn Routine.
To exit the learn routine:
The learn routine will be exited if any of the following occurs:
➤
➤
Close the open door.
➤
➤
Turn the ignition on.
32
©
2001
Directed Electronics, Inc.