Clifford Matrix RS2 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 48

Clifford Matrix RS2 Скачать руководство пользователя страница 31

feature is called Owner Recognition. Each time that particular transmitter is used to disarm the
system, the assigned feature settings will be recalled. Owner Recognition is only possible when
programming the unit via the computer interface or hand-held programmer.

If using the Directed Bitwriter or PC Interface to program System Features Code Learning,
you may lock the unit so that the features cannot be altered via manual programming with

the Valet switch. If you later wish to program the system manually, you must unlock the unit using
the Directed Bitwriter or PC Interface before you will be able to reprogram the features. If the siren
generates one long chirp when attempting to program the unit, this indicates that the unit has been
locked and must be unlocked with the Bitwriter or PC Interface before proceeding.

To enter the System Features Learn Routine:

1. O

Oppeenn aa ddoooorr.. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be
connected.)

2. IIggnniittiioonn.. Turn the ignition on, then back off. (The heavy gauge PINK wire of

the relay satellite must be connected.)

3. SSeelleecctt aa m

meennuu.. Press and HOLD the Valet/Program switch. (The Valet/Program

switch must be plugged into the blue port.) After three seconds the siren will
chirp once indicating entry to the Basic Features Menu. If this is the menu you
wish to access, release the switch and go on to Step 4. If the switch is not
released, you will jump to the next menu and the siren will chirp twice. There
are three possible menus. Once you have selected the desired menu, release the
Valet/Program switch.

4. SSeelleecctt aa ffeeaattuurree.. Press and release the Valet/Program switch the number of

times corresponding to the feature you wish to change. For example, to access
the third feature, press and release 3 times. Then press the switch once more
and HOLD it. The siren will chirp the number of times equal to the feature
you have accessed.

5. PPrrooggrraam

m tthhee ffeeaattuurree.. While HOLDING the Valet/Program switch, you can

toggle the feature on and off using the remote transmitter. Pressing

will

select the one chirp setting. Pressing

will select the two chirp setting.

(See the

Feature Menus

section of this guide.)

www.clifford.com

31

«
...
29
30
31
32
33
...
»

Содержание Matrix RS2

















































Отзывы:

Нет отзывов