User- Programmable Fea tures (Con tin ued)
n
NOTE 5:
Programs a remote control from any other Clifford system (that uses ACG 2
technology) to arm or disarm the vehicle. For instance, to set the button
+
✱
combination of the other car’s master remote control to arm/disarm the system, select
column 4, row 1, then transmit the
+
✱
button combination from the remote
you are programming. The system will respond with one chirp. Immediately press the
button combination a second time. The system will respond with two chirps. The other
vehicle’s remote will now arm/disarm the system by pressing the
and
✱
buttons
simultaneously.
n
NOTE 6:
This feature can be controlled by a secondary remote or any remote control
of any other ACG 2 system, after that remote has been programmed to arm/disarm this
system. Select the row and column number, then transmit the unused button on the
other remote that you want to use to perform that function. The system will respond
with the same number of chirps as the row number. Please note that you must first set a
button on the remote that will arm/disarm the system (column 4, row 1) before these
others will be accepted.
Installer- Programmable Fea tures
To access the installer-programmable features, use the same procedure as on page 15, but
after completing step 4,
continue
to press and hold the
✱
side of the PlainView 2 Switch for
another 10 seconds. You’ll hear 3 chirps to indicate the system is in installer-program mode.
Table of Installer-Programmable Features: 1 chirp = OFF, 2 chirps = ON.
Fea ture
Se lect
Un marked 1
Un marked 2
Un marked 3
✱
1
Single
/Double Lock
Pulse
(
1 chirp
/2 chirps)
Accessory Output Timer
Duration
(10 Seconds)
NOTE 1
Door Ajar
Warning
/Delayed
Courtesy Lights
(
1 chirp
/2 chirps)
✱
2
Single
/Double
Unlock Pulse
(
1 chirp
/2 chirps)
Auxiliary A type
(
Pulsed
/Timed/Latched)
(
1 chirp
/2 chirps/3 chirps)
Auxiliary A Interlock
(On/
Off
)
✱
3
Lock/Unlock Pulse
1 second/
3 second
(
1 chirp
/2 chirps)
Auxiliary B type
(
Pulsed
/Timed/Latched)
(1 chirp/
2 chirps/3 chirps)
Auxiliary B Interlock
On/
Off
✱
4
NOT USED
Diesel Engine
/Gas Engine
(1 chirp/
2 chirps
)
(Requires Optional
IntelliStart 4)
NOTE 2
AutoActivate Auxiliary B
(On/
Off
)
✱
5
Program RPM
(Requires Optional
IntelliStart 4)
Program Optional
SmartWindows 4 or
Learn PageMate 4 ID
NOT USED
NOTE 1:
Once this feature is selected, you will hear one chirp to confirm that the
timer has started. You can set this anywhere from one to 4.25 minutes (255
seconds). When the desired duration has been reached, press the unmarked side of
the PlainView 2 switch. You will hear two chirps to confirm the new system timer
duration.
NOTE 2:
After programming either gas or diesel, you must perform the mandatory RPM
programming.
16
