www.directed.com
10
h1/16 red/white accessory output
When the system receives the code controlling the accessory output, this wire will sup-
ply an output as long as the transmission continues. This is often used to operate a
trunk/hatch release or other relay-driven function.
IIM
MPPO
ORRTTA
AN
NTT!! Never use this wire to drive anything but a relay or a low-current input!
The transistorized output can only supply 200 mA of current. Connecting directly to a
solenoid, motor, or other high-current device will cause it to fail.
h1/17 orange ground when armed
This wire provides a (-) ground output as long as the system is armed and will ceas
when the system is disarmed. This output can be used for an additional immobilizer
relay or to control additional accessories such as window automation, voice modules,
or pagers.
h1/18 yellow ignition input
Connect this wire to the (+) 12V ignition wire that is (+) 12V in the igntion and crank
positions.. Take great care that this wire cannot be shorted to the chassis at any point.
