© 2004 directed electronics, inc.
23
system status chirps
multiple event total recall
This will report the last eight system triggers.
1.
Press and hold
of the PlainView 2 Valet switch.
2.
While still holding
, arm and disarm the system, then release the button.
3.
The LED will start to blink to indicate the most recent trigger and proceed down
to the eighth trigger. If fewer than eight triggers are stored in memory, the LED
will blink continuously until the system is armed/disarmed using the transmitter
after recalling the final trigger. For more information, please refer to the Table of
Zones section of this guide.
Action
No. of Chirps
Description
Arm
2
System armed.
Arm
4
System armed with hood and
trunk bypass zones 5 and 6.
Arm
2 (5-second pause) 4
System armed with door bypass zones
Arm
2 (10-second pause) 4
System armed with sensor active
and bypassed zones 3 and 8.
Disarm
1
System disarmed.
Disarm
3
System disarmed with zone violation
Disarm
5
System disarmed transmitter low battery
