www.directed.com
30
installer selectable features
To enter the Installer Selectable Features grid follow the instructions for the User
Selectable Features with the exception of step 4. Perform step 4 as described below
to enter the Installer Selectable Features grid.
Hold/Chirp/Release - After entering the PIN code, press and hold
until the siren
chirps once. Continue holding for approximately 10 seconds until the siren chirps
three times, then release the button. You have now entered the feature selection posi-
tion of the Installer Selectable Features grid.
*
P1 = Pulsed channel output is disabled with the ignition on or the alarm is
armed.
**
P2 = Pulsed channel output works anytime.
*** Only with optional IntelliStart connected.
**** Only with optional SmartWindows connected.
First
Press
Then
Press
Lock pulse
single/double
Acc. ouput A P1*/
P2**/timed/latch/
latch (ignition reset)
Starter Kill
no/nc
Unlock pulse
single/double
Acc. output auto
active off/arm/
disarm/both
Program RPM***
Lock pulse
duration
0.8/3.5 sec
Acc. output timer
duration
Engine type
gas/diesel***
Domelight delay
on/off
Not used
Program
SmartWindows****
