Clemas & Co Tennant GL20, Руководство оператора

Страница: 55 / 57

SUPERVISOR CONTROLS
Tennant T300 (03- 2015)
55
To Add/Edit User Profiles
Before adding new user profiles, it is recommended to
configure the four Zone Settings in advance (See
CONTROL PANEL OPERATION).
1. Press the “Add/Edit Profiles” button to enter
the user profile settings (Figure 140).
FIG. 140
2. Press the “Add Profile” button to add a new
user profile (Figure 141).
FIG. 141
3. Press the “Operator” button to add a new
operator (Figure 142).
Or press the “Supervisor” button to add an
additional supervisor (Figure 142).
Note: The machine’s default supervisor profile can
not be deleted from profile list.
FIG. 142
4. Enter the new user’s profile ID (identification) then
press the green forward arrow (Figure 143).
FIG. 143
5. Create an assigned login number for the new user
profile then press the green arrow (Figure 144).
The new login number can be any combination of
numbers ranging from 3 to 8 digits long.
FIG. 144
6. Now select the controls that the new user should
have access to use (Figure 145). Green represents
unlocked controls and gray represents locked
controls. Press the blinking save icon to save new
profile.
FIG. 145
7. The new user profile is now saved to the operator
profile list as shown (Figure 146). Multiple Operator
and Supervisor user profiles can be added. Press
the back arrow to return to the previous screen to
add more user profiles or to enable login.
FIG. 146