Clemas & Co Tennant GL20, Руководство оператора

Страница: 22 / 57

OPERATION
22
Tennant T300 (03- 2015)
9. Press the Settings icon on the operator home
screen to access the following screen (Figure 57).
The buttons are explained as follows.
FIG. 57
Tutorials button - Includes videos on how to
perform specific operation and maintenance
procedures. Press the video icons to start videos
(Figure 58).
FIG. 58
Setup button - Requires the user to be in
supervisor mode to access machine setup. See
SUPERVISOR CONTROLS instructions at back of
manual.
About button - Includes machine systems
information.
Logout button - Required when supervisor
controls are configured with assigned login
numbers. See SUPERVISOR CONTROLS
instructions at back of manual.
10. The service indicator icon on the home
screen will flash yellow or red when a machine fault
is detected (Figure 59).
FIG. 59
In conjunction with a flashing service indicator icon,
the following fault screens will automatically pop up
to indicate the problem.
Yellow machine fault Icon (Figure 60). See
SERVICE INDICATOR CODES to diagnose
machine fault.
FIG. 60
Red or Yellow ec-H2O system fault icon (Figure
61). See SERVICE INDICATOR CODES to
diagnose ec-H2O system fault.
When the ec-H2O system fault icon is
blinking
Blue and Red , the water conditioning cartridge has
expired and needs to be replaced. See ec-H2O
NanoClean WATER CONDITIONING CARTRIDGE
REPLACEMENT.
FIG. 61
Yellow Parking brake Icon (figure 62). Parking
brake lever must be released before operating.
FIG. 62
Press arrows at top of screen to cycle through fault
screens.