Clemas & Co Tennant GL20 Скачать руководство пользователя страница 25

Страница: 25 / 57

OPERATION

Tennant T300 (02- 2017)

EMERGENCY SHUT-OFF BUTTON (Drive models)

Push the emergency shut-off button in the event of an

emergency (Figure 71). This red button shuts off all

power to machine. To regain power, turn the button

clockwise and restart the key.
Only use this button in the event of an emergency. It is

not intended for routine machine shutdown.

FIG. 71

BATTERY DISCHARGE INDICATOR

The battery discharge indicator (BDI) displays the

charge level of the batteries while the machine is

operating. When the batteries are fully charged, all five

indicators are lit (Figure 72). When the discharge level

reaches the red light, stop scrubbing and recharge the

batteries. If the red light begins to flash, the scrubbing

function will automatically shut off to protect the

batteries from total discharge. Drive Model: The

machine will still propel when the red light is flashing,

this will allow user to transport machine to charging

station.

T300

T300 LCD

FIG. 72

CIRCUIT BREAKER PANEL

The machine is equipped with resettable circuit

breakers to protect the machine from a current

overload. If a circuit breaker trips, disconnect the

battery cable connections and reset the breaker by

pressing the reset button after the breaker has cooled

down. Reconnect the battery cable connections. If the

circuit breaker does not reset or continues to trip

contact service personnel.
The circuit breaker panel is located near the battery

compartment and identified as described below

(Figure 73).

FIG. 73

Circuit

Breaker

Rating

Circuit protected

CB1

4 A

Key switch, control board

CB2

4 A

ec-H2O module

CB3

4 A

ec-H2O pump

CB4

30 A

Propel

FOR SAFETY: When servicing machine, all repairs

must be performed by trained personnel.

The circuit breaker panel is protected by a splash

guard. To access the circuit breaker panel when the

recovery tank is in the down position lift the splash

guard as shown (Figure 74).

FIG. 74

Содержание Tennant GL20


























































Результаты поиска

Содержание Tennant GL20

Отзывы:

Бренды по названию

Популярные бренды

Clemas & Co Tennant GL20, Руководство оператора

Результаты поиска

Содержание Tennant GL20

Отзывы:

Бренды по названию

Популярные бренды