Clemas & Co Tennant GL20 Скачать руководство пользователя страница 38

Страница: 38 / 57

MAINTENANCE

Tennant T300 (02- 2017)

ON- BOARD BATTERY CHARGER:
Pro/Membrane Models

- To change the on- board

battery charger settings, service application software

required, contact service. As an alternative, the charger

settings may be manually changed. S

ee CHANGING

ON- BOARD BATTERY CHARGER SETTINGS for

Pro- Membrane model.

The battery discharge indicator

will automatically reprogram to match battery type

when the battery charger profile is changed.

Pro- Panel Model

- To change the on- board battery

charger settings,

see CHANGING ON- BOARD

BATTERY CHARGER SETTINGS for Pro- Panel

model.

The battery discharge indicator will

automatically reprogram to match battery selection.

CHANGING ON- BOARD BATTERY CHARGER

SETTINGS (Pro/Membrane models)

To manually change the on-board battery charger

settings for a different battery type, carefully follow

instructions as described below :

NOTE: The manual method is only an alternative if

unable to change setting by use of the Service

Application Software performed by Service.

1. Disconnect battery cables (Figure 111).

FIG. 111

2. Unwrap the battery charger power cord from the

cord hooks.

3. Using a T25 star screwdriver, remove the two

screws located at the bottom of the control console

to access battery charger (Figure 112).

FIG. 112

4. Disconnect the battery cable, power cord and wire

harness from charger. Using a T25 star

screwdriver, remove the four screws that mount

charger to machine (Figure 113). Remove charger

from machine.

FIG. 113

5. Remove the black cap from bottom side of charger

to access the profile dial (Figure 114)

FIG. 114

6. Using a small standard screwdriver, turn the dial to

the appropriate battery type according to the

following chart (Figure 115).

FIG. 115

Dial

Position

Battery Description Settings

with AH Ranges

CAN- BUS setting*

Wet, Trojan 105- 155 AH

Wet, Enersys/Tab 105- 155 AH

AGM, Discover 80- 150 AH

AGM, Fullriver 80- 150 AH

AGM, TPPL, Enersys 20- 40 AH

Gel, Sonnenschein 80- 150 AH

Содержание Tennant GL20


























































Результаты поиска

Содержание Tennant GL20

Отзывы:

Бренды по названию

Популярные бренды

Clemas & Co Tennant GL20, Руководство оператора

Результаты поиска

Содержание Tennant GL20

Отзывы:

Бренды по названию

Популярные бренды