background image

91b_1_5 en bedingt.fm, 24.09.2007

P1891E/EN 09/07

17

Before initial operation

4

4

Before initial operation

The 47BA has been configured by Cooper Power Tools. A setting for your specific screw joint 
needs must only be made with the TMEB-200 / TMEC controller or a PC by a qualified person. 
For more information, refer to the TMEB-200 / TMEB-COM / TMEC programming manual.

4.1

Setting up tool holder

➔ 

Mount the tool holder on a stable base.

For tool holder with IrDA interface port:

➔ 

Select the location in such a way that no outside light shines onto the tool holder.
 This can inhibit data transmission.

➔ 

Lay the connection cable in such a way that there is no danger that persons can trip.

4.2

Ambient conditions

4.3

Charging the battery

Charge fully before first use.
Battery is only partly charged when delivered.

➔ 

Fully charge before first use.

➔ 

Battery charging temperature: 5 °C to +45 °C (+41 °F to +113 °F)

➔ 

Follow the safety instructions printed on the battery and charger.

➔ 

Fully charge new batteries or those not used for a long time.

➔ 

Do not totally discharge the battery (< 17.5 V).

➔ 

Protect the battery from impact.

➔ 

Keep the charger and battery contacts clean and dry.

➔ 

Protect the battery from moisture.

➔ 

The battery can remain in the charger when not in use: the self-discharging is very low.

➔ 

Replace used batteries and recycle them (see 12 Disposal, page 71.)

Ambient temperature

0 °C (32 °F) to m40° C (+104° F)

Humidity

0 to 80 %, not with dew

Working height

up to 1000 m above sea level

WARNING!

Electrical shock, overheating or leakage of corrosive liquid from the battery can occur when 
using incorrect chargers or batteries.

➔ 

Use only original CLECO batteries and chargers.
 They are designed for use together.

NOTE

With proper use, the battery can be charged at least 800 (60% capacity) times.
 Here, the following is important:

Содержание 47BAB15AM3









































































Отзывы: