CleaverBrooks ADAC 1000, Руководство по эксплуатации

Страница: 97 / 140

APPENDIX A - Variable Frequency Drive Parameters
Part No. 750-386 A-3
131 PI Lower Limit -1000 -100.0%
132 PI Upper Limit 1000 100.0%
133 PI Preload 0 0.0 Hz
134 PI Status Read-Only xxxx 0000
135 PI Ref Meter Read-Only
136 PI Fdback Meter Read-Only
137 PI Error Meter Read-Only
138 PI Output Meter Read-Only
139 PI BW Filter 0 0.0 Radians
* 140 Accel Time 1 30 3.0 Secs
141 Accel Time 2 100 10.0 Secs
* 142 Decel Time 1 30 3.0 Secs
143 Decel Time 2 100 10.0 Secs
145 DB While Stopped 0 Disabled
146 S Curve 0 0%
147 Current Lmt Sel 0 Cur Lim Val
148 Current Lmt Val Motor FLA x 1.5
149 Current Lmt Gain 250 250
150 Drive OL Mode 3 Both-PWM 1st
151 PWM Frequency 2 2
152 Droop RPM @ FLA 0.0 0.0 RPM
153 Regen Power Lim -500 -50.0%
154 Current Rate Lim 4000 400.00%
155 Stop/Brk Mode A 1 Ramp
156 Stop/Brk Mode B 0 Coast
157 DC Brake Lvl Sel 0 DC Brake Lvl
158 DC Brake Level 270 27.0 Amps
159 DC Brake Time 0 0.0 Secs
160 Bus Reg Ki 450 450
161 Bus Reg Mode A 1 Adjust Freq
162 Bus Reg Mode B 4 Both-Frq 1st
163 DB Resistor Type 2 None
164 Bus Reg Kp 1500 1500
165 Bus Reg Kd 1000 1000
166 Flux Braking 0 Disabled
167 Powerup Delay 0 0.0 Secs
* 168 Start At PowerUp 1 Enabled
* 169 Flying Start En 1 Enabled
170 Flying StartGain 4000 4000
171 Reserved Read-Only
172 Reserved Read-Only
173 Reserved Read-Only
* 174 Auto Rstrt Tries 0 1
175 Auto Rstrt Delay 10 1.0 Secs
176 Reserved Read-Only
177 Gnd Warn Level 30 3.0 Amps
178 Sleep Wake Mode 0 Disabled
179 Sleep Wake Ref 2 Analog In 2
180 Wake Level 6000 6.0mA,6.0V
181 Wake Time 10 1.0 Secs
182 Sleep Level 5000 5.0mA,5.0V
183 Sleep Time 0 0.0 Secs