CleaverBrooks ADAC 1000, Руководство по эксплуатации

Страница: 24 / 140

Chapter 3 — Commissioning
3-2 Part No. 750-386
Note: Certain screen layouts may differ between single tank and two
tank systems.
3.1-Main Menu
On system power-up, the Main Menu is displayed. This screen
provides pushbutton access to the various Operator, Configuration,
and Alarm screens.
3.2-Begin System Configuration
If the system has not been configured, the <System Config
Required> button will show on the Main Menu screen. Press here
to begin system configuration.
The user must be logged in at the appropriate password level to
change configuration data. If the user tries to change configuration
data without having proper access rights, a pop-up window will
appear and a password will be requested.
If a valid user name and password are entered, the operator will be
allowed to change data.
The current user login status can be seen at the top right of each
screen. The color of the pushbutton will also indicate if the user has
proper access rights.
Pressing the button for the value that needs modifying will display
a numeric keypad, allowing the operator to enter the new value. The
range of valid entries as well as the currently entered value are
shown above the keypad. An out-of-range entry will show up in red
and require re-entering an acceptable value. Enter the desired value
and press the ENTER key, If the entry is valid, the value will be
accepted and the keypad will disappear.
Figure 3-1 Main Menu