CleaverBrooks ADAC 1000, Руководство по эксплуатации

Страница: 95 / 140

APPENDIX A - Variable Frequency Drive Parameters
Part No. 750-386 A-1
APPENDIX A - Variable Frequency Drive Parameters
An asterisk * indicates the parameter needs to be changed from the factory default.
A.1 - PF 70
PF70 Enhanced Control - ADAC 1000
Set parameter 196 to Advanced first.
Par. No. Parameter Name Raw Value Real Value
1 Output Freq Read-Only
2 Commanded Freq Read-Only
3 Output Current Read-Only
4 Torque Current Read-Only
5 Flux Current Read-Only
6 Output Voltage Read-Only
7 Output Power Read-Only
8 Output Powr Fctr Read-Only
9 Elapsed MWh Read-Only
10 Elapsed Run Time Read-Only
11 MOP Frequency Read-Only
12 DC Bus Voltage Read-Only
13 DC Bus Memory Read-Only
14 Elapsed kWh Read-Only
15 Torque Estimate Read-Only
16 Analog In1 Value Read-Only
17 Analog In2 Value Read-Only
22 Ramped Speed Read-Only
23 Speed Reference Read-Only
24 Commanded Torque Read-Only
25 Speed Feedback Read-Only
26 Rated kW Read-Only
27 Rated Volts Read-Only
28 Rated Amps Read-Only
29 Control SW Ver Read-Only
40 Motor Type 0 Induction
* 41 Motor NP Volts Motor Nameplate
* 42 Motor NP FLA Motor Nameplate
* 43 Motor NP Hertz Motor Nameplate
* 44 Motor NP RPM Motor Nameplate
* 45 Motor NP Power Motor Nameplate
46 Mtr NP Pwr Units 0 Horsepower
47 Motor OL Hertz 200 20.0 Hz
48 Motor OL Factor 100 1.0
49 Motor Poles 4 Depending on Motor
50 Motor OL Mode 0 XXXXXXXX XXXXXXX0
53 Motor Cntl Sel 0 Sensrls Vect
54 Maximum Voltage From Drive Nameplate
55 Maximum Freq 600 60.0
56 Compensation 3 XXXXXXXX XXXXXX11
57 Flux Up Mode 0 Manual
58 Flux Up Time 0 0.00 Secs
59 SV Boost Filter 500 500