manualshive.com logo in svg

ClearSpan SunBurst Dome Premium Gothic Style 106602, Руководство по сборке

Поделиться
Скачать
ClearSpan SunBurst Dome Premium Gothic Style 106602 Скачать руководство пользователя страница 20

Visit 

www.ClearSpan.com

 for additional products and customer assistance.

CLEARSPAN

™

 SUNBURST POLY BUILDINGS

0

SHELTER CARE AND MAINTENANCE

Proper care and maintenance of your shelter is important. 
Check the following items periodically to properly maintain 
your shelter:

Regularly check the main cover and end panels to see 
that these remain tight and in proper repair.

Check connections and all fasteners to verify that they 
remain tight.

Do not climb or stand on the shelter at anytime.

Remove debris and objects that may accumulate on 
the shelter. Use tools that will not damage the cover 
when removing debris.

Remove snow to prevent excess accumulation. Use 
tools that will not damage the cover when removing 
snow.

Check the contents of the shelter to verify that  
nothing is touching the cover or the end panels that 
could cause damage.

Check the anchoring system to ensure that all  
components are tight and in good repair.

If the shelter is moved, inspect all parts and  
connections before reassembling.

For replacement or missing parts, call 1-800-245-9881 
for assistance.

NOTE:

 With the exception of Truss Arch buildings,  

ClearSpan™ shelters and shelters do not have any tested 
loading criteria.

•

•

•

•

•

•

•

•

•

Space below is reserved for customer notes.

Содержание SunBurst Dome Premium Gothic Style 106602






























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды