User Guide
|
Eclipse HX-PiCo
Page 62
7
Maintaining the Eclipse HX-PiCo
This chapter provides guidance on maintaining the Eclipse HX-PiCo.
7.1
Recommended spare parts
To facilitate quick repair of the system with minimum downtime, Clear-Com
recommends keeping the following spare system components in good working
condition at all times:
One of each type of intercom panel in the system.
One of each type of interface / card in the system.
Due to the complexity of the system, field service generally should be limited to
isolating the specific component of the system with the problem.
7.2
Dual independent power supplies
The Eclipse HX-PiCo matrix includes two internal power supply units. One power
supply unit can power an entire matrix; the second unit provides a backup in case
of an equipment failure.
In addition, the two supplies have separate IEC connectors to AC mains power, and
are designed for completely automatic and transparent changeover between
supplies in the event of a power failure on one of the AC branches.
Note:
For more information about the power supplies, see 5.1.2 Powering the Eclipse
HX-PiCo.
Servicing instructions (including hardware installation
instructions) are for use by qualified personnel only. To reduce
the risk of electric shock, do not perform any servicing other
than that described by this guide, unless qualified to do so.
Refer all servicing to qualified service personnel.
