CleanSpace CS302, Инструкция пользователя

Страница: 30 / 90

30
CHANGING THE STERI-PLUS EXHALATION FILTER CS3039
To remove the Steri-Plus Exhalation Filter, first remove the filter and cover assembly from the HALO half mask. The
best way to do this is to squeeze the mask with one hand whilst pulling the filter/cover assembly off using a twisting
motion. This is shown below in Figure 26.
Figure 26 – Removing the Exhalation Filter Assembly from the HALO Half Mask
Then, unclip the two parts of the filter case by placing your thumb on the end of the case with the dimpled thumb
print. Pull outwards on the outer case (as if trying to straighten it) and it will unclip from the inner case. Once
unclipped the filter case will swing open and the filter can then be easily removed and replaced as shown in Figure
27. See Section 13 for detailed information on how to insert a new filter and how to attach it to the HALO half mask.
Figure 27 – Replacing Steri-Plus Exhalation Filter
CHANGING THE HALO BIO EXHALATION FILTER CS3027
To remove the filter, simply pull it off the BIO Exhalation Valve Cover using a twisting motion. To fit a new Exhalation
Filter, press it onto the BIO Exhalation Valve Cover until you hear a “click” and it snaps into place.
CHANGING THE HE FILTER (CS3022 AND CS3025)
To unlock the filter cover, lift the pin located on the left side of the filter cover. The filter cover will become loose and
fall out. Remove the filter. Check that the area where the filter sits is clean. If necessary, wipe it with a clean cloth or
CleanSpace Cleaning Wipe. Fit a new filter, locating the tongue on the right-hand side of the filter inside the locating