CleanSpace CS302, Инструкция пользователя

Страница: 18 / 90

18
Figure 13 – Adjust Button
 Place the machine in Standby Mode
Press the Power button once.

Don the respirator and start to breathe. (The motor should start)
Place the blower behind your neck with the bellows and mask hanging down one side, harness should be hanging in
front of mask. Fasten the AirClip on your left-hand side. Pull the mask up and around onto your face. Pull the harness
back and onto your head. Adjust harness and settle it on your head, move cleats up or down to adjust.
Figure 14 – Blower behind neck
Figure 15 – Fasten AirClip
Figure 16 – Device fastened around neck
Figure 17 – Pull mask up and onto
face
Figure 18 – Pull harness back and onto
head
Figure 19 – Settle harness and adjust
Breathe normally. The motor should start and you should feel fresh air on your face. If the motor does not start, it was
not in Standby Mode. Take the respirator off, press the Power button to activate Standby Mode and don it again as
described above.