CLEAN BURN CB-1400, Руководство оператора

Страница: 33 / 108

Operator's Manual: Model CB-1400
4-5
Mounting the Furnace (continued)
Floor Mounting
WARNING: To prevent serious personal
injury, make sure the floor can safely bear the
weight of the furnace.
CAUTION: If you are installing your furnace
in an area with a combustible floor (e.g. over
the top of a parts room or on a mezzanine), you must
construct a
non-combustible floor as shown in Figure
4E. Refer to NFPA-31 or CSA-B-139.
Raised Platform Mounting
WARNING: To prevent serious personal
injury, make sure the platform is designed
to safely bear the weight of the furnace and allow
safe servicing of furnace components. The
platform must be constructed of
non-combustible
materials (e.g. steel) and must be securely
anchored to an adjacent wall.
1. Refer to Figure 4D and follow the
instructions as provided in the diagram.
FIGURE 4D - Furnace Installed on
Raised Platform
Constructing a Non-Combustible Floor
1. Determine the size of floor you will need to construct:
• Measure the width and length of the furnace cabinet
• Add 12" (minimum) to all sides of the cabinet to achieve the total measurement for the
non-combustible floor.
The CB-1400 is approximately 34" x 30"
34" + 12" + 12" = 58"
30" + 12" + 12" = 54"
Therefore your non-combustible floor will need to be 58" x 54"
2. Refer to Figure 4E. Install two (2) pieces of 5/8" sheet rock on top of the combustible material
(wooden floor, wooden beams, etc.) The sheet rock must be cut to the size of the total
non-combustible floor area.
3. Place a sheet of 24-gauge (minimum) galvanized sheet metal on top of the 5/8" sheet rock;
the sheet metal must cover the sheet rock completely.
4. Place 4" thick (minimum) hollow masonry block, end to end, on top of the 24-gauge sheet metal
to make a solid foundation. Be sure to add center cross blocking to safely and adequately support
the furnace.
8
F
OOT
M
IN
IM
UM
F
R
O
M
F
LO
O
R T
O
FU
RNAC
E
IF
TH
E
RE
IS
A
POT
E
N
T
IA
L
F
O
R
GAS
O
LI
N
E
F
UM
E
S
IN
Y
OUR
SERV
ICE
ARE
A
. C
HE
CK
LOCAL
C
ODE
S
A
ND NF
PA
88
−B
I88830